Search

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup (WPS)

Configure Your Wi-Fi Direct Network Using the PIN Method of Wi-Fi Protected Setup (WPS)

Related Models:DCP‑L2530DW / DCP‑L2537DW / MFC‑L2710DW / MFC‑L2730DW / MFC‑L2750DW

DCP-L2530DW/DCP-L2537DW/MFC-L2710DW

If your mobile device supports the PIN Method of Wi-Fi Protected Setup (WPS), follow these steps to configure a Wi-Fi Direct network:
  1. Press Menu.
  2. Press image or image to select the [Network] option, and then press OK.
  3. Press image or image to select the [Wi-Fi Direct] option, and then press OK.
  4. Press image or image to select the [Group Owner] option, and then press OK.
  5. Press image or image to select the [On] option, and then press OK.
  6. Press image or image to select the [PIN Code] option, and then press OK.
  7. When [Wi-Fi Direct On?] appears, enable the Wi-Fi Direct network.
  8. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears on the machine's LCD. Press OK on your machine.
    This will start the Wi-Fi Direct setup. To cancel, press Clear.
  9. The machine will wait for a connection request from your mobile device. When [Input PIN Code] appears, enter the PIN displayed on your mobile device in the machine.
  10. Press OK.
  11. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from or scanning to your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.

MFC-L2730DW/MFC-L2750DW

If your mobile device supports the PIN Method of Wi-Fi Protected Setup (WPS), follow these steps to configure a Wi-Fi Direct network:
image
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi Direct connection request received.Press [OK] to connect.] will appear on the LCD. Press [OK] to connect.
  1. Press image[Settings]>[All Settings]>[Network]>[Wi-Fi Direct]>[Group Owner].
  2. Press [On].
  3. Press image or image to select the [PIN Code] option. Press [PIN Code].
  4. When [Activate Wi-Fi Direct on other device. Then Press [OK].] appears, activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for instructions) and then press [OK] on your Brother machine.
    This will start the Wi-Fi Direct setup. To cancel, press image.
  5. The machine will wait for a connection request from your mobile device. When [PIN Code] appears, enter the PIN displayed on your mobile device in to the machine. Press [OK].
  6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from or scanning to your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.
Did you find the information you needed?