Home > Introduction to Your Brother Machine > Control Panel Overview
Control Panel Overview
The control panel may vary depending on your model.
MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW
![image](../img/GUID-F014BB1D-FEE6-475D-A1CF-E9B3BB927B1A-low.gif)
- One Touch Buttons
-
Store and recall up to eight fax and telephone numbers.
To access stored One Touch fax and telephone numbers 1-4, press the One Touch button assigned to that number. To access stored One Touch fax and telephone numbers 5-8, press and hold Shift as you press the button.
- Function Buttons
-
- Redial/Pause
-
Press to dial the last number you called. This button also inserts a pause when programming quick dial numbers or when dialing a number manually.
- Hook
-
Press Hook before dialing to ensure a fax machine answers, and then press Start.
If the machine is in Fax/Tel (F/T) Mode and you pick up the handset of an external telephone during the F/T ring (pseudo double-rings), press Hook to talk.
- WiFi (for wireless models)
-
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless access point.
- Resolution (for certain models only)
-
Press to change the Fax resolution.
- 2 in 1 (ID) Copy
-
Press to copy both sides of an identification card onto a single page.
- 2-sided
-
Press to copy on both sides of a sheet of paper.
- Options
-
Press to access temporary settings for faxing, scanning, or copying.
- Liquid Crystal Display (LCD)
-
Displays messages to help you set up and use the machine.
- If the machine is in Fax Mode, the LCD displays:
a. Date & Time
b. Receive Mode
- When you press COPY, the LCD displays:
c. Type of copy
d. Number of copies
e. Quality
f. Contrast
g. Copy ratio
- Mode Buttons
-
- FAX
-
Press to switch the machine to Fax Mode.
- SCAN
-
Press to switch the machine to Scan Mode.
- COPY
-
Press to switch the machine to Copy Mode.
![image](../img/GUID-4B454F16-062A-4AA8-A371-9D449D23AFA4-low.gif)
- Menu Buttons
-
- Clear
-
Press to delete entered data or cancel the current setting.
- Menu
-
Press to access the Menu for programming your machine settings.
- OK
-
Press to store your machine settings.
or
-
Press to scroll back or forward through menu selections.
or
-
- Press to scroll up or down through menus and options.
- Press to change the resolution in Fax Mode.
-
Press
to access speed dial numbers.
- Dial Pad
-
- Use to dial fax and telephone numbers.
- Use as a keyboard to enter text or characters.
Power On/Off
-
Turn on the machine by pressing
.
Turn off the machine by pressing and holding
. The LCD displays [Shutting Down] and stays on for a few seconds before turning off. If you have an external telephone or TAD connected, it is always available.
- Stop/Exit
-
- Press to stop an operation.
- Press to exit from a menu.
- Start
-
- Press to start sending faxes.
- Press to start copying.
- Press to start scanning documents.
HL-L2390DW/DCP-L2550DW
![image](../img/GUID-8F9B92E6-79D8-4C27-A8A2-B51109F568D8-low.gif)
Power On/Off
-
Turn on the machine by pressing
.
Turn off the machine by pressing and holding
.. The LCD displays [Shutting Down] and stays on for a few seconds before turning off.
- Function Buttons
-
- Copy/Scan Options
-
Press to access temporary settings for scanning or copying.
- WiFi (for wireless models)
-
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless access point.
- Scan
-
Press to switch the machine to Scan Mode.
- 2 in 1 (ID) Copy
-
Press to copy both sides of an identification card onto a single page.
- Liquid Crystal Display (LCD)
-
Displays messages to help you set up and use the machine.
- If the machine is in Ready Mode or Copy Mode, the LCD displays:
a. Type of copy
b. Number of copies
c. Quality
d. Contrast
e. Copy ratio
![image](../img/GUID-02430DC0-5B2E-4BBF-B307-98D8FFDB2F2B-low.gif)
- Menu Buttons
-
- Menu
-
Press to access the Menu for programming your machine settings.
- Clear
-
- Press to delete entered data.
- Press to cancel the current setting.
- OK
-
Press to store your machine settings.
or
-
Press to scroll up or down through menus and options.
- Stop/Exit
-
- Press to stop an operation.
- Press to exit from a menu.
- Start
-
- Press to start copying.
- Press to start scanning documents.