Search

Home > Fax > Voice Operations and Fax Numbers > Combine Address Book Numbers

Combine Address Book Numbers

Related Models:MFC‑L5710DN / MFC‑L5710DW / MFC‑L5915DW / MFC‑L6720DW / MFC‑L6915DW
Sometimes you may want to choose from several long-distance carriers when you send a fax. Rates may vary depending on the time and destination. To take advantage of low rates, you can store the access codes of long-distance carriers and credit card numbers as Address Book numbers.

You can store these long dialling sequences by dividing them and setting them up as separate Address Book numbers in any combination. You can even include manual dialling using the dial pad.

For example: You might have stored '01632' and '960555' in your machine as shown in the following table.

Applicable Models

'01632' stored in

'960555' stored in

MFC-L5710DN/MFC-L5710DW/MFC-L5915DW/MFC-L6720DW/MFC-L6915DW

Address Book: Brother 1

Address Book: Brother 2

You can use them both to dial '01632-960555' by using the following procedure.

MFC-L5710DN/MFC-L5710DW

  1. Press image [Fax]>[Address Book].
  2. Swipe up or down or press image or image to display the number of Brother 1.
  3. Press the number.
  4. Press [Apply].
  5. Press image[Options].
  6. Press image or image to display the [Address Book] option, and then press it.
  7. Press [OK].
  8. Swipe up or down or press image or image to display the number of Brother 2.
  9. Press the number.
  10. Press [Apply].
  11. Press [Fax Start].
    The machine will dial '01632-960555'.

To temporarily change a number, you can substitute part of the number by pressing it using the LCD. For example, to change the number to '01632-960556', you could enter the number (Brother 1: 01632) using the Address Book, press [Apply], and then enter 960556 using the LCD.

image

If you must wait for another dial tone or signal at any point in the dialling sequence, create a pause in the number by pressing [Pause].

MFC-L5915DW/MFC-L6720DW/MFC-L6915DW

  1. Press image [Fax]>[Address Book].
  2. Swipe up or down or press image or image to display the number of Brother 1.
  3. Press the number.
  4. Press [Apply].
  5. Press [Address Book].
  6. Press [OK].
  7. Swipe up or down or press image or image to display the number of Brother 2.
  8. Press the number.
  9. Press [Apply].
  10. Press [Fax Start].
    The machine will dial '01632-960555'.

To temporarily change a number, you can substitute part of the number by pressing it using the LCD. For example, to change the number to '01632-960556', you could enter the number (Brother 1: 01632) using the Address Book, press [Apply], and then enter 960556 using the LCD.

image

If you must wait for another dial tone or signal at any point in the dialling sequence, create a pause in the number by pressing [Pause].

Did you find the information you needed?