Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (MFC-L5718DNMFC-L5728DW)
Settings Tables (MFC-L5718DN/MFC-L5728DW)
[Settings]
[Settings]
Level 1 | Level 2 | Descriptions |
---|---|---|
Date & Time | - | Access the Date and Time setting menus. |
Toner | Toner Life | View the approximate remaining toner life. |
Test Print | Print a test page. | |
Toner Cartridge Check | View the installed toner cartridge information on the LCD, for example, if the toner cartridge is genuine. | |
Network | Wired LAN | Access the Wired LAN setting menus. |
WLAN(Wi-Fi) (MFC-L5728DW) | Access the WLAN setting menus. | |
Fax Preview | - | View received faxes on the LCD. |
Tray Setting | - | Access the tray setting menus. |
Eco Mode | - | Access the Eco Mode setting menu. |
All Settings | - | Configure the detailed settings. |
[General Setup]
Level 3 | Level 4 | Level 5 | Level 6 | Descriptions |
---|---|---|---|---|
Tray Setting | Paper Type | MP Tray | - | Select the paper type that matches the paper in the MP tray. |
Tray 1 | - | Select the paper type that matches the paper in the standard paper tray. | ||
Tray 2 *1 | - | Select the paper type that matches the paper in the Optional Tray (Tray 2). | ||
Tray 3 *1 | - | Select the paper type that matches the paper in the Optional Tray (Tray 3). | ||
Paper Size | MP Tray | - | Select the paper size you loaded in the MP tray. | |
Tray 1 | - | Select the paper size you loaded in the standard paper tray. | ||
Tray 2 *1 | - | Select the paper size you loaded in the Optional Tray (Tray 2). | ||
Tray 3 *1 | - | Select the paper size you loaded in the Optional Tray (Tray 3). | ||
Tray Use: Copy | - | - | Select the tray you want to use for making a Copy. | |
Tray Use: Fax | - | - | Select the tray you want to use for printing a Fax. | |
Tray Use: Print | - | - | Select the tray you want to use to Print. | |
Print Position | MP Tray | X Offset | Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the MP tray horizontally from -500 (left) to +500 (right) dots when printing at 300 dpi. | |
Y Offset | Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the MP tray vertically from -500 (up) to +500 (down) dots when printing at 300 dpi. | |||
Tray 1 | X Offset | Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the standard paper tray horizontally from -500 (left) to +500 (right) dots when printing at 300 dpi. | ||
Y Offset | Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the standard paper tray vertically from -500 (up) to +500 (down) dots when printing at 300 dpi. | |||
Tray 2 *1 | X Offset | Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the Optional tray (Tray 2) horizontally from -500 (left) to +500 (right) dots when printing at 300 dpi. | ||
Y Offset | Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the Optional tray (Tray 2) vertically from -500 (up) to +500 (down) dots when printing at 300 dpi. | |||
Tray 3 *1 | X Offset | Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the Optional tray (Tray 3) horizontally from -500 (left) to +500 (right) dots when printing at 300 dpi. | ||
Y Offset | Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the Optional tray (Tray 3) vertically from -500 (up) to +500 (down) dots when printing at 300 dpi. | |||
Skip Tray *1 | - | - | Select a specific tray to skip if you know it is loaded with the wrong size paper. | |
Separator Tray *1 | - | - | Select the tray that contains the paper used as the separator paper, which is inserted between each print job. | |
Check Paper | - | - | Select whether or not to display a message indicating you must check the paper type and paper size. | |
Volume | Ring | - | - | Adjust the ring volume. |
Beep | - | - | Adjust the beeper volume. | |
Speaker | - | - | Adjust the speaker volume. | |
LCD Settings | Backlight | - | - | Adjust the brightness of the LCD backlight. |
Dim Timer | - | - | Set how long the LCD backlight stays on after returning to the Home screen. | |
Screen Settings | Home Screen | - | - | Set the Main Home screen. |
Scan Screen | - | - | Set the default Scan screen. | |
Display Information | IP Address | - | Select whether to display your machine's IP Address on the Home screen. | |
Notice Settings | Scan Result(Skip Blank Page) | - | - | Displays the total scanned pages and skipped pages after scanning is completed. |
Ecology | Eco Mode | - | - | |
Toner Save | - | - | Increase the page yield of the toner cartridge. | |
Sleep Time | - | - | Set how much time should pass before the machine enters Power Saving mode. | |
Quiet Mode | - | - | Decrease printing noise. | |
Auto Power Off | - | - | Set the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode. | |
Improve Output | - | - | - | Enable the Reduce Curl feature or the Toner Fixing feature to improve print output. |
Setting Lock | Set Password | - | - | Restrict unauthorised users from changing the machine’s settings. |
Lock Off⇒On | - | - | ||
Delete Storage | Macro ID | - | - | Delete the registered Macro data. |
Stream ID | - | - | Delete the registered Stream data. | |
Font ID | - | - | Delete the registered Font data. | |
Delete All | - | - | Restore your machine's Macro/Stream and Font data to the factory settings. | |
[Shortcut Settings]
Level 3 | Level 4 | Descriptions |
---|---|---|
(Select a shortcut button) | Rename | Change the shortcut name. |
Edit | Change the shortcut settings. | |
Delete | Delete the shortcut. | |
Register Card/NFC | Assign a shortcut to an ID card. | |
Delete Card/NFC | Remove a shortcut from an ID card. |
[Fax]
Level 3 | Level 4 | Level 5 | Descriptions |
---|---|---|---|
Setup Receive | Ring Delay | - | Set the number of rings before the machine answers in Fax Auto mode. |
Receive Mode | - | Select the Receive Mode that best suits your needs. | |
Fax Preview | - | View received faxes on the LCD. | |
Fax Detect | - | Receive fax messages automatically when you answer a call and hear fax tones. | |
Remote Codes | Remote Codes | Answer calls at an extension or external telephone and use codes to turn the Remote Codes on or off. You can personalise the codes. | |
Act.Code | |||
Deact.Code | |||
Auto Reduction | - | Reduce the size of incoming faxes. | |
Fax Rx Stamp | - | Print the received time and date on the top of incoming faxes. | |
2-sided | - | Print incoming faxes on both sides of the paper. | |
Setup Send | Batch TX | - | Combine delayed faxes to the same fax number at the same time of day into one transmission. |
Auto Redial | - | Set the machine to redial the last fax number after five minutes, if the fax did not go through because the line was busy. | |
Destination | - | Set the machine to display the destination information on the LCD during fax dialling. | |
Report Setting | Journal Period | Journal Period | Set the interval for automatic printing of the Fax Journal. |
Dial Restriction | Dial Pad | - | Restrict the dialling when using the dial pad. |
Address Book | - | Restrict the dialling when using the Address Book. | |
Shortcuts | - | Restrict the dialling when using a Shortcut. | |
LDAP Server | - | Restrict the dialling of LDAP server numbers. | |
Remaining Jobs | - | - | Check which scheduled jobs are in the machine's memory and cancel selected jobs. |
Miscellaneous | Fax Mode | - | Select the transmission process when sending or receiving the faxes manually. |
[Printer]
Level 3 | Level 4 | Level 5 | Descriptions |
---|---|---|---|
Emulation | - | - | Select the emulation mode. |
Resolution | - | - | Select a print resolution. |
Density | - | - | Increase or decrease the print density. |
Print Settings | - | - | Set your print settings to Text or Graphics. |
Print Options | Font List | HP LaserJet | Print a list of the machine’s internal fonts. |
BR-Script 3 | |||
Test Print | - | Print a test page. | |
2-sided | 2-sided Print | - | Enable or disable 2-sided printing and choose long edge or short edge. |
Single Image | - | For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time. When you use Letterhead or Preprinted paper, you must select the 2-sided Feed option. If you select 1-sided Feed for Letterhead or Preprinted paper, the last page will be printed on the reverse side. | |
Auto Continue | - | - | Select this setting if you want the machine to clear paper size errors or media type errors, and use paper from other trays. |
Paper Type | - | - | Set the paper type. |
Paper Size | - | - | Set the paper size. |
Copies | - | - | Set the number of printed pages. |
Orientation | - | - | Set pages to print in either portrait or landscape orientation. |
Print Position | - | - | Access the Print Position setting menus. |
Auto FF | - | - | Allow the machine to print any remaining data automatically. |
HP LaserJet | Font No. | Font No. | Set the font number. |
Soft Font No. | Set the soft font number. This menu appears if a soft font is installed on your Brother machine. | ||
Font Pitch | - | Set the font pitch. (Available only for certain fonts.) | |
Font Point | - | Set the font size. (Available only for certain fonts.) | |
Symbol Set | - | Select the symbol or character set. | |
Table Print | - | Print the code table. | |
Auto LF | - | ON: CR -> CR+LF, OFF: CR -> CR | |
Auto CR | - | ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR OFF: LF -> LF, FF -> FF, or VT -> VT | |
Auto WRAP | - | Select whether you want a line feed and carriage return when the carriage position reaches the right margin. | |
Auto SKIP | - | Select whether you want a line feed and carriage return when the carriage position reaches the bottom margin. | |
Left Margin | - | Set the left margin at column 0 to 70 columns at 1 cpi. | |
Right Margin | - | Set the right margin at column 10 to 80 columns at 1 cpi. | |
Top Margin | - | Set the top margin distance from the top edge of the paper. | |
Bottom Margin | - | Set the bottom margin distance from the bottom edge of the paper. | |
Lines | - | Set the number of lines on each page. | |
Tray Command | - | Select this setting if a tray mismatch appears when you use the HP drivers. | |
Epson FX-850 | Font No. | Font No. | Set the font number. |
Soft Font No. | Set the soft font number. This menu appears if a soft font is installed on your Brother machine. | ||
Font Pitch | - | Set the font pitch. (Available only for certain fonts.) | |
Font Point | - | Set the font size. (Available only for certain fonts.) | |
Character Set | - | Select the symbol or character set. | |
Table Print | - | Print the code table. If Change Emulation appears on the LCD, choose the option you want.. | |
Auto LF | - | ON: CR -> CR+LF, OFF: CR -> CR | |
Auto Mask | - | Set the top and bottom margins to two-line each. When you set Auto Mask to On, this setting overrides the Top Margin and Bottom Margin settings. | |
Left Margin | - | Set the left margin at column 0 to 70 columns at 1 cpi. | |
Right Margin | - | Set the right margin at column 10 to 80 columns at 1 cpi. | |
Top Margin | - | Set the top margin distance from the top edge of the paper. | |
Bottom Margin | - | Set the bottom margin distance from the bottom edge of the paper. | |
Lines | - | Set the number of lines on each page. | |
IBM Proprinter | Font No. | Font No. | Set the font number. |
Soft Font No. | Set the soft font number. This menu appears if a soft font is installed on your Brother machine. | ||
Font Pitch | - | Set the font pitch. (Available only for certain fonts.) | |
Font Point | - | Set the font size. (Available only for certain fonts.) | |
Character Set | - | Select the symbol or character set. | |
Table Print | - | Print the code table. If Change Emulation appears on the LCD, choose the option you want. | |
Auto LF | - | ON: CR -> CR+LF, OFF: CR -> CR | |
Auto CR | - | ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR OFF: LF -> LF, FF -> FF, or VT -> VT | |
Auto Mask | - | Set the top and bottom margins to two-line each. When you set Auto Mask to On, this setting overrides the Top Margin and Bottom Margin settings. | |
Left Margin | - | Set the left margin at column 0 to 70 columns at 1 cpi. | |
Right Margin | - | Set the right margin at column 10 to 80 columns at 1 cpi. | |
Top Margin | - | Set the top margin distance from the top edge of the paper. | |
Bottom Margin | - | Set the bottom margin distance from the bottom edge of the paper. | |
Lines | - | Set the number of lines on each page. | |
BR-Script 3 | Error Print | - | Choose whether the machine prints the error information when errors occur. |
Multiple Page | - | Set the page layout when printing multiple pages. | |
PDF Print Options | - | Set the PDF Print setting to print either comments (Markup) or stamps in the PDF file, along with the text. | |
PDF Fit to Page | - | Select if the machine scales or resizes the pages in the PDF file to fit the selected paper size. | |
Carbon Menu | Carbon Copy | - | Enable or disable the Carbon Copy function. |
Copies | - | Set the number of printed pages. | |
Copy1 Tray | - | Select the tray you use for Copy1. | |
Copy1 Macro | - | Select a macro/stream for Copy1. | |
Copy2 Tray... Copy8 Tray | - | Select the tray you use for Copy2 to Copy8. | |
Copy2 Macro... Copy8 Macro | - | Select a macro/stream for Copy2 to Copy8. | |
Reset Printer | - | - | Restore the machine settings to the factory settings. |
[Network] (MFC-L5728DW)
Level 3 | Level 4 | Level 5 | Level 6 | Descriptions |
---|---|---|---|---|
Wired LAN | TCP/IP | Boot Method | IP Boot Tries | Select the Boot method that best suits your needs. |
IP Address | - | Enter the IP address. | ||
Subnet Mask | - | Enter the Subnet mask. | ||
Gateway | - | Enter the Gateway address. | ||
Node Name | - | Enter the Node name. (Up to 32 characters) | ||
WINS Configuration | - | Select the WINS configuration mode. | ||
WINS Server | Primary | Specify the IP address of the primary WINS server. | ||
Secondary | Specify the IP address of the secondary WINS server. | |||
DNS Server | Primary | Specify the IP address of the primary DNS server. | ||
Secondary | Specify the IP address of the secondary DNS server. | |||
APIPA | - | Set the machine to allocate the IP address from the link-local address range automatically. | ||
IPv6 | - | Turn the IPv6 protocol on or off. | ||
Ethernet | - | - | Select the Ethernet link mode. | |
Wired Status | - | - | View the current wired status. | |
MAC Address | - | - | View the machine's MAC address. | |
Set to Default | - | - | Restore the wired network settings to the factory settings. | |
Wired Enable | - | - | Turn the Wired LAN interface on or off manually. | |
WLAN(Wi-Fi) | Find Wi-Fi Network | - | - | Configure your wireless network settings manually. |
TCP/IP | Boot Method | IP Boot Tries | Select the Boot method that best suits your needs. | |
IP Address | - | Enter the IP address. | ||
Subnet Mask | - | Enter the Subnet mask. | ||
Gateway | - | Enter the Gateway address. | ||
Node Name | - | Enter the Node name. (Up to 32 characters) | ||
WINS Configuration | - | Select the WINS configuration mode. | ||
WINS Server | Primary | Specify the IP address of the primary WINS server. | ||
Secondary | Specify the IP address of the secondary WINS server. | |||
DNS Server | Primary | Specify the IP address of the primary DNS server. | ||
Secondary | Specify the IP address of the secondary DNS server. | |||
APIPA | - | Set the machine to allocate the IP address from the link-local address range automatically. | ||
IPv6 | - | Turn the IPv6 protocol on or off. | ||
WPS/Push Button | - | - | Configure your wireless network settings using the one-button push method. | |
WPS/PIN Code | - | - | Configure your wireless network settings using WPS with a PIN. | |
WLAN Status | Status | - | View the current wireless network status. | |
Signal | - | View the current wireless network signal strength. | ||
SSID | - | View the current SSID. | ||
Comm. Mode | - | View the current Communication mode. | ||
MAC Address | - | - | View the machine's MAC address. | |
Set to Default | - | - | Restore the wireless network settings to the factory settings. | |
WLAN Enable | - | - | Turns the wireless interface on or off. | |
Wi-Fi Direct | Manual | - | - | Configure your Wi-Fi Direct network settings manually. |
Group Owner | - | - | Set your machine as the Group Owner. | |
Push Button | - | - | Configure your Wi-Fi Direct network settings using the one-button push method. | |
PIN Code | - | - | Configure your Wi-Fi Direct network settings using WPS with a PIN code. | |
Device Information | Device Name | - | View your machine's device name. | |
SSID | - | View the Group Owner's SSID. When the machine is not connected, the LCD displays Not Connected. | ||
IP Address | - | View your machine's current IP Address. | ||
Status Information | Status | - | View the current Wi-Fi Direct network status. | |
Signal | - | View the current Wi-Fi Direct network signal strength. When your machine acts as Group Owner, the LCD always indicates a strong signal. | ||
I/F Enable | - | - | Turn the Wi-Fi Direct connection on or off. | |
Mail Address | - | - | Enter the email address. (Up to 255 characters) | |
Setup Server | SMTP | Server | Enter the SMTP server name and address. | |
Port | Enter the SMTP port number. | |||
Auth. for SMTP | Select the Security method for email notification. | |||
SSL/TLS | Send or receive an email via an email server that requires secure SSL/TLS communication. | |||
Verify Cert. | Verify the SMTP Server Certificate automatically. | |||
POP3/IMAP4 | Protocol | Select the protocol for receiving an email from the server. | ||
Server | Enter the server name and address. | |||
Port | Enter the port number. | |||
Mailbox Name | Enter the mailbox name. (Up to 255 characters) | |||
Mailbox Password | Enter the password to log into the server. (Up to 128 characters) | |||
Select Folder | Select the specified folder in the mailbox using the IMAP4 protocol. | |||
SSL/TLS | Send or receive an email via an email server that requires secure SSL/TLS communication. | |||
Verify Cert. | Verify the SMTP Server Certificate automatically. | |||
APOP | Turn APOP on or off. | |||
Setup Mail RX | Auto Polling | Auto Polling | Check the server for new messages automatically. | |
Poll Frequency | Set the interval for checking new messages on the server. | |||
Header | - | Select the contents of the email header to be printed. | ||
Del/Read Error Mail | - | The POP3 server deletes error emails automatically. The IMAP4 server deletes error emails automatically after you read them. | ||
Notification | - | Receive notification messages. | ||
Setup Mail TX | Sender Subject | - | View the subject. | |
Size Limit | Size Limit | Limit the size of email documents. | ||
Maximum Size(MB) | ||||
Notification | - | Send notification messages. | ||
Setup Relay | Relay Broadcast | - | Relay a document to another fax machine. | |
Relay Domain | Relay ## | Register the Domain name. | ||
Relay Report | - | Print the relay Broadcast Report. | ||
Manual Receive | - | - | Check the POP3 or IMAP4 server for new messages manually. | |
Web Based Mgmt | - | - | - | Enable or disable Web Based Management. If you enable this function, make sure you specify the connection method to use Web Based Management. |
Fax to Server | Fax to Server | - | - | Select the network connection type. |
Prefix | - | - | ||
Suffix | - | - | ||
I-Fax Forward | - | - | - | Enable or disable the I-Fax Forward function. |
IPsec | - | - | - | IPsec is an optional security feature of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing this setting. |
Global Detect | Allow Detect | - | - | Enable or disable Global Detect, a function that detects and notifies the user when the user unintentionally connects to a global network. |
Reject Access | - | - | Disable connections to the global network. | |
Network Reset | - | - | - | Restore all network settings back to the factory settings. |
[Network] (MFC-L5718DN)
Level 3 | Level 4 | Level 5 | Level 6 | Descriptions |
---|---|---|---|---|
Wired LAN | TCP/IP | Boot Method | IP Boot Tries | Select the Boot method that best suits your needs. |
IP Address | - | Enter the IP address. | ||
Subnet Mask | - | Enter the Subnet mask. | ||
Gateway | - | Enter the Gateway address. | ||
Node Name | - | Enter the Node name. (Up to 32 characters) | ||
WINS Configuration | - | Select the WINS configuration mode. | ||
WINS Server | Primary | Specify the IP address of the primary WINS server. | ||
Secondary | Specify the IP address of the secondary WINS server. | |||
DNS Server | Primary | Specify the IP address of the primary DNS server. | ||
Secondary | Specify the IP address of the secondary DNS server. | |||
APIPA | - | Set the machine to allocate the IP address from the link-local address range automatically. | ||
IPv6 | - | Turn the IPv6 protocol on or off. | ||
Ethernet | - | - | Select the Ethernet link mode. | |
Wired Status | - | - | View the current wired status. | |
MAC Address | - | - | View the machine's MAC address. | |
Wired Enable | - | - | Turn the Wired LAN interface on or off manually. | |
Mail Address | - | - | Enter the email address. (Up to 255 characters) | |
Setup Server | SMTP | Server | Enter the SMTP server name and address. | |
Port | Enter the SMTP port number. | |||
Auth. for SMTP | Select the Security method for email notification. | |||
SSL/TLS | Send or receive an email via an email server that requires secure SSL/TLS communication. | |||
Verify Cert. | Verify the SMTP Server Certificate automatically. | |||
POP3/IMAP4 | Protocol | Select the protocol for receiving an email from the server. | ||
Server | Enter the server name and address. | |||
Port | Enter the port number. | |||
Mailbox Name | Enter the mailbox name. (Up to 255 characters) | |||
Mailbox Password | Enter the password to log into the server. (Up to 128 characters) | |||
Select Folder | Select the specified folder in the mailbox using the IMAP4 protocol. | |||
SSL/TLS | Send or receive an email via an email server that requires secure SSL/TLS communication. | |||
Verify Cert. | Verify the SMTP Server Certificate automatically. | |||
APOP | Turn APOP on or off. | |||
Setup Mail RX | Auto Polling | Auto Polling | Check the server for new messages automatically. | |
Poll Frequency | Set the interval for checking new messages on the server. | |||
Header | - | Select the contents of the email header to be printed. | ||
Del/Read Error Mail | - | The POP3 server deletes error emails automatically. The IMAP4 server deletes error emails automatically after you read them. | ||
Notification | - | Receive notification messages. | ||
Setup Mail TX | Sender Subject | - | View the subject. | |
Size Limit | Size Limit | Limit the size of email documents. | ||
Maximum Size(MB) | ||||
Notification | - | Send notification messages. | ||
Setup Relay | Relay Broadcast | - | Relay a document to another fax machine. | |
Relay Domain | Relay ## | Register the Domain name. | ||
Relay Report | - | Print the relay Broadcast Report. | ||
Manual Receive | - | - | Check the POP3 or IMAP4 server for new messages manually. | |
Web Based Mgmt | - | - | - | Enable or disable Web Based Management. If you enable this function, make sure you specify the connection method to use Web Based Management. |
Fax to Server | Fax to Server | - | - | Select the network connection type. |
Prefix | - | - | ||
Suffix | - | - | ||
I-Fax Forward | - | - | - | Enable or disable the I-Fax Forward function. |
IPsec | - | - | - | IPsec is an optional security feature of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing this setting. |
Global Detect | Allow Detect | - | - | Enable or disable Global Detect, a function that detects and notifies the user when the user unintentionally connects to a global network. |
Reject Access | - | - | Disable connections to the global network. | |
Network Reset | - | - | - | Restore all network settings back to the factory settings. |
[Print Reports]
Level 3 | Level 4 | Descriptions |
---|---|---|
Address Book | - | Print a list of names and numbers stored in the Address Book. |
Fax Journal | - | Print a list of information about your last 200 incoming and outgoing faxes. (TX means Transmit. RX means Receive.) |
User Settings | - | Print a list of your User settings. |
Printer Settings | - | Print a list of your Printer settings. |
Network Configuration | - | Print a list of your Network settings. |
Print File List | - | Print a list of data saved in the machine's memory. |
Drum Dot Print | - | Print the Drum Dot Check Sheet. |
WLAN Report (MFC-L5728DW) | - | Print the wireless LAN connection results. |
[Machine Info.]
Level 3 | Level 4 | Descriptions |
---|---|---|
Serial No. | - | Check your machine's serial number. |
Firmware Version | Main Version | Check your machine's firmware version. |
Security Version | ||
Firmware Update | - | Update your machine to the latest firmware. |
Firmware Auto Check | - | View firmware information on the Main Home screen. |
Page Counter | Total | Check the total number of pages the machine has printed. |
Fax | ||
Copy | ||
Other | ||
Parts Life *1 | Drum | Display the remaining life of the drum unit. |
Fuser | Display the remaining life of the fuser unit. | |
Laser Unit | Display the remaining life of the laser unit. | |
PF Kit MP | Display the remaining life of PF Kit MP. | |
PF Kit 1 | Display the remaining life of PF Kit 1. | |
PF Kit 2 *2 | Display the remaining life of PF Kit 2. | |
PF Kit 3 *2 | Display the remaining life of PF Kit 3. |
[Initial Setup]
Level 3 | Level 4 | Descriptions |
---|---|---|
Date & Time | Date | Add the date and time on the screen and in the headings of the faxes you send. |
Time | ||
Clock Type | Select the time format (12-hour or 24-hour). | |
Time Zone | Set your time zone. | |
Station ID | Fax | Enter your name and fax number so it appears on each page you fax. |
Tel | ||
Name | ||
Tone/Pulse | - | Select the dialling mode. |
Dial Tone | - | Shorten the dial tone detection pause. |
Dial Prefix | - | Set a prefix number to be added before the fax number every time you dial. |
Compatibility | - | Adjust the equalisation for transmission difficulties. VoIP service providers offer fax support using various standards. If you regularly experience fax transmission errors, select Basic (for VoIP). |
Reset | Machine Reset | Restore all the machine settings that you have changed. |
Network Reset | Restore all network settings back to the factory settings. | |
Address Book & Fax | Erase all stored phone numbers and fax settings. | |
All Settings | Restore all the machine's settings back to the factory settings. | |
Factory Reset | Restore all settings back to the factory settings. | |
Local Language | - | Change your LCD language. |