Home > Paper Handling > Unscannable and Unprintable Areas
Unscannable and Unprintable Areas
The measurements in the table below show maximum unscannable and unprintable areas from the edges of the most commonly-used paper sizes. These measurements may vary depending on the paper size or settings in the application you are using.
Do not attempt to scan, copy, or print into these areas; your output will not reflect anything in these areas.
| Usage | Document Size | Top (1) Bottom (3) | Left (2) Right (4) |
|---|
| Fax (Sending) | Letter, Legal | 2.9 mm | 3,9 mm |
| A4 | 2.9 mm | (ADF) 1 mm (Scanner Glass) 3 mm |
| Copy *1 | Letter, Legal | 4 mm | 4 mm |
| A4 | 4 mm | 3 mm |
| Scan | Letter | 1.0 mm *2 | 1.0 mm *2 |
| A4 | 1.0 mm *2 | 1.0 mm *2 |
| Legal | 1.0 mm *2 | 1.0 mm *2 |
| | Letter, Legal | 4,2 mm | 4,2 mm |
| A4 | 4,2 mm | 4,2 mm |
*1
A 1 in 1 copy and 100% document size copy
*2
The number shown is the default value. This number is adjustable to 0 mm. If the number is set to 0 mm, a black shadow may appear around the edges on the scanned image.
Did you find the information you needed?