Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Feature Tables (HL-L3270CDW)
Feature Tables (HL-L3270CDW)
(Wi-Fi Setup)
Level 2 | Level 3 | Descriptions |
|---|---|---|
| TCP/IP *1 | Change the TCP/IP settings. |
Setup Wizard | Configure the wireless network settings using the setup wizard. | |
WLAN Assistant | Configure your wireless network settings using the Brother installation disc. | |
WPS | Configure your wireless network settings using the one-button push method. | |
WPS w/ PIN Code *1 | Configure the wireless network settings using WPS with a PIN code. | |
WLAN Status *1 | Display the wireless network connection status. | |
MAC Address *1 | Display the MAC address of the machine. | |
Set to Default *1 | Restore wireless network settings of your machine to the factory settings. | |
WLAN Enable *1 | Turn the wireless interface on or off. |
Available after the Wi-Fi® is set up.
[Toner]
Level 2 | Level 3 | Level 4 | Descriptions |
|---|---|---|---|
| Toner Life | - | View the approximate remaining toner life for each colour. |
Test Print | - | Print the test page. | |
Calibration | Calibrate | Initiate colour calibration to check and correct colours. | |
Reset | Reset the calibration parameters to the default settings. | ||
Registration | - | Align the print position of each colour. |
[Functions]
Level 2 | Level 3 | Descriptions |
|---|---|---|
Functions | Secure Print | Press to access the Secure Print option. |
Web | Press to connect the Brother machine to an Internet service. |