Toner

Toner Life

-

View the approximate remaining toner life.

Test Print

-

Print a test page.

Colour Correction

Correction Start

Initiate colour calibration to check and correct colours.

Reset

Reset the calibration parameters to the default settings.

Toner Cartridge Check

Black

View the installed toner cartridge information on the LCD, for example, if the toner cartridge is genuine.

Magenta

Cyan

Yellow

Network

Wired LAN

-

Access the Wired LAN setting menus.

WLAN(Wi-Fi)

-

Access the WLAN setting menus.

Wi-Fi Direct

-

-

Access the Wi-Fi Direct setting menus.

Tray Setting

-

-

Access the tray setting menus.

Eco Mode

-

-

Turn the following machine settings on at the same time:

• 2-sided Print: Long Edge *1
• Sleep Time: 0 Min
• Dim Timer: 10 Secs
• Quiet Mode:On *1
• Toner Save:On *1

All Settings

-

-

Configure the detailed settings.

Tray Setting

Paper Type

MP Tray

-

Select the paper type that matches the paper in the MP tray.

Tray 1

-

Select the paper type that matches the paper in the standard paper tray.

Tray 2 *1

-

Select the paper type that matches the paper in the Optional Tray (Tray 2).

Paper Size

MP Tray

-

Select the paper size you loaded in the MP tray.

Tray 1

-

Select the paper size you loaded in the standard paper tray.

Tray 2 *1

-

Select the paper size you loaded in the Optional Tray (Tray 2).

Manual Feed

-

-

Select whether to print from the Manual Feed Slot.

Tray Use

-

-

Select the paper tray you want to use.

Priority

-

-

When the Auto option is selected in the Tray Use menu, select the order in which the machine uses paper trays that contain paper of the same size.

Print Position

MP Tray

X Offset

Y Offset

Tray 1

X Offset

Y Offset

Tray 2 *1

X Offset

Y Offset

Skip Tray

-

-

Select a specific tray to skip if you know it is loaded with the wrong size paper.

Separator Tray

-

-

Select the tray that contains the paper used as the separator paper, which is inserted between each print job.

Check Paper

-

-

Select whether or not to display a message indicating you must check the paper type and paper size when you pull a paper tray out of the machine.

LCD Settings

Backlight

-

-

Adjust the brightness of the LCD backlight.

Dim Timer

-

-

Set how long the LCD backlight stays on after the last finger press.

Screen Settings

Display Information

IP Address

-

Select whether to display your machine's IP Address on the Home screen.

Ecology

Eco Mode

-

-

Turn the following machine settings on at the same time:

• 2-sided Print: Long Edge *2
• Sleep Time: 0 Min
• Dim Timer: 10 Secs
• Quiet Mode:On *2
• Toner Save:On *2

Toner Save

-

-

Increase the page yield of the toner cartridge.

Sleep Time

-

-

Set how much time should pass before the machine enters Power Saving mode.

Quiet Mode

-

-

Decrease printing noise.

Auto Power Off

-

-

Set the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode.

Setting Lock

Set Password

-

-

Restrict unauthorised users from changing the machine’s settings.

Lock Off⇒On

-

-

New Password

(Available only when you enter the password for the first time.)

-

-

Interface

Select

-

-

Select the interface to use.

If you select the Auto option, the machine changes the interface to USB or network depending on which interface is receiving data.

Auto IF Time

-

-

Set the time-out period for the auto interface selection.

Input Buffer

-

-

Increase or decrease the input buffer capacity.

Delete Storage

Macro ID

-

-

Delete the registered Macro data.

Stream ID

-

-

Delete the registered Stream data.

Font ID

-

-

Delete the registered Font data.

Delete All

-

-

Restore your machine's Macro/Stream and Font data to the factory settings.

Emulation

-

-

Choose the emulation mode.

Quality

-

-

Select the print quality.

Print Options

Font List

HP LaserJet

Print the font list and samples of HP LaserJet.

BR-Script 3

Print the font list and samples of BR-Script.

Test Print

-

Print the test page.

2-sided

2-sided Print

-

Select whether to print on both sides of the paper.

Single Image

-

For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time.

When you use preprinted paper, you must select the 2-sided Feed option. If you select 1-sided Feed for preprinted paper, the last page will be printed on the reverse side.

Auto Continue

-

-

Select this setting if you want the machine to clear paper size errors or media type errors, and use paper from other trays.

Output Colour

-

-

Set the output colour.

Paper Type

-

-

Set the paper type.

Paper Size

-

-

Set the paper size.

Copies

-

-

Set the number of printed pages.

Orientation

-

-

Set pages to print in either portrait or landscape orientation.

Edge Emphasis

-

-

Make the text appear sharper.

Print Position

MP Tray

X Offset

Move the print start position (at the upper left corner of pages) horizontally from -500 (left) to +500 (right) dots in 300 dpi.

Y Offset

Move the print start position (at the upper left corner of pages) vertically from -500 (up) to +500 (down) dots in 300 dpi.

Tray 1

X Offset

Move the print start position (at the upper left corner of pages) horizontally from -500 (left) to +500 (right) dots in 300 dpi.

Y Offset

Move the print start position (at the upper left corner of pages) vertically from -500 (up) to +500 (down) dots in 300 dpi.

Tray 2

X Offset

Move the print start position (at the upper left corner of pages) horizontally from -500 (left) to +500 (right) dots in 300 dpi.

Y Offset

Move the print start position (at the upper left corner of pages) vertically from -500 (up) to +500 (down) dots in 300 dpi.

Auto FF

-

-

Allow the machine to print any remaining data automatically.

HP LaserJet

Font No.

Font No.

Set the font number.

Soft Font No.

Set the soft font number.

This menu appears if a soft font is installed on your Brother machine.

Font Pitch

-

Set the font pitch.

(Available only for certain fonts.)

Font Point

-

Set the font size.

(Available only for certain fonts.)

Symbol Set

-

Select the symbol or character set.

Table Print

-

Print the code table.

Auto LF

-

ON: CR -> CR+LF, OFF: CR -> CR

Auto CR

-

ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR

OFF: LF -> LF, FF -> FF, or VT -> VT

Auto WRAP

-

Select whether you want a line feed and carriage return when the carriage position reaches the right margin.

Auto SKIP

-

Select whether you want a line feed and carriage return when the carriage position reaches the bottom margin.

Left Margin

-

Set the left margin at column 0 to 70 columns at 1 cpi.

Right Margin

-

Set the right margin at column 10 to 80 columns at 1 cpi.

Top Margin

-

Set the top margin distance from the top edge of the paper.

Bottom Margin

-

Set the bottom margin distance from the bottom edge of the paper.

Lines

-

Set the number of lines on each page.

Tray Command

-

Select this setting if a tray mismatch appears when you use the HP drivers.

BR-Script 3

Error Print

-

Choose whether the machine prints the error information when errors occur.

CAPT

-

Use CAPT (Colour Advanced Printing Technology) for optimal print quality when printing a PS file created by a non-Brother PS driver.

Colours and photos appear clearer and more accurate. Print speed will be slower.

PDF

Multiple Page

-

Set the page layout when printing multiple pages.

PDF Print Options

-

Set the PDF Print setting to print either comments (Markup) or stamps in the PDF file, along with the text.

PDF Fit to Page

-

Select if the machine scales or resizes the pages in the PDF file to fit the selected paper size.

Carbon Menu

Carbon Copy

-

Enable or disable the Carbon Copy function.

Copies

-

Set the number of printed pages.

Copy1 Tray

-

Select the tray you use for Copy1.

Copy1 Stream

-

Select a stream for Copy1.

Copy2 Tray

Copy8 Tray

-

Select the tray you use for Copy2 to Copy8.

Copy2 Stream

Copy8 Stream

-

Select a stream for Copy2 to 8.

Colour Correction

Correction Start

-

Initiate colour calibration to check and correct colours.

Reset

-

Reset the calibration parameters to the default settings.

Auto Correction

-

Set the machine to perform Colour Calibration and Registration automatically.

Colour Settings

Setting Mode

Select whether to apply the colour print settings of the machine or the printer driver.

Colour Mode

Select the colour mode.

Improve Gray Colour

Turn on or off to improve the image quality of shaded areas.

Enhance Black Printing

Turn on or off if a black graphic does not print correctly.

Brightness

Adjust the brightness.

Contrast

Adjust the contrast.

Red

Adjust the red colour.

Green

Adjust the green colour.

Blue

Adjust the blue colour.

Reset Printer

-

-

Restore the machine settings to the factory settings.

Wired LAN

TCP/IP

Boot Method

-

Choose the IP method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

Primary

Specify the IP address of the primary WINS server.

Secondary

Specify the IP address of the secondary WINS server.

DNS Server

Primary

Specify the primary DNS server's IP address.

Secondary

Specify the secondary DNS server's IP address.

APIPA

-

Allocate the IP address from the link-local address range automatically *1.

IPv6

-

Turn the IPv6 protocol on or off.

Ethernet

-

-

Choose the Ethernet link mode.

Wired Status

-

-

Display the wired network connection status.

MAC Address

-

-

Display your machine's MAC address.

Set to Default

-

-

Restore your machine's wired network settings to the factory settings.

Wired Enable

-

-

Turn the wired interface on or off.

WLAN(Wi-Fi)

Find Wi-Fi Network

-

-

Configure your wireless network settings manually.

TCP/IP

Boot Method

-

Choose the IP method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

Primary

Specify the IP address of the primary WINS server.

Secondary

Specify the IP address of the secondary WINS server.

DNS Server

Primary

Specify the primary DNS server's IP address.

Secondary

Specify the secondary DNS server's IP address.

APIPA

-

Allocate the IP address from the link-local address range automatically *1.

IPv6

-

Turn the IPv6 protocol on or off.

WPS/Push Button

-

-

Configure your wireless network settings using the one-button push method.

WPS/PIN Code

-

-

Configure the wireless network settings using WPS with a PIN code.

WLAN Status

Status

-

Display the wireless network connection status.

Signal

-

Display the wireless network signal strength.

SSID

-

Display the wireless SSID (Network Name).

Comm. Mode

-

Display the current Communication mode.

MAC Address

-

-

Display your machine's MAC address.

Set to Default

-

-

Restore your machine's wireless network settings to the factory settings.

WLAN Enable

-

-

Turn the wireless interface on or off.

Wi-Fi Direct

Manual

-

-

Configure your Wi-Fi Direct network settings manually.

Group Owner

-

-

Set your machine as the Group Owner.

Push Button

-

-

Configure your Wi-Fi Direct network settings using the one-button push method quickly.

PIN Code

-

-

Configure your Wi-Fi Direct network settings using WPS with a PIN code quickly.

Device Information

Device Name

-

View your machine's device name.

SSID

-

Display the Group Owner's SSID (Network Name).

IP Address

-

Display your machine's IP Address.

Status Information

Status

-

Display the Wi-Fi Direct network status.

Signal

-

Display the current Wi-Fi Direct network signal strength.

I/F Enable

-

-

Enable or disable the Wi-Fi Direct connection.

NFC

-

-

-

Turn the NFC function on or off.

Web Connect Settings

Proxy Settings

Proxy Connection

-

Change the web connection settings.

Address

-

Port

-

User Name

-

Password

-

Web Based Mgmt

-

-

-

Enable or disable Web Based Management.

If you enable this function, make sure you specify the connection method to use Web Based Management.

IPsec

-

-

-

IPsec is an optional security feature of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing this setting.

Global Detect

Allow Detect

-

-

Enable or disable Global Detect, a function that detects and notifies the user when the user unintentionally connects to a global network.

Reject Access

-

-

Disable connections to the global network.

Network Reset

-

-

-

Restore all network settings of your machine to the factory settings.

Printer Settings

Print the Printer Settings page.

Network Configuration

Print the Network Configuration Report.

Print File List

Print a list of data saved in the memory.

Drum Dot Print

Print the Drum Dot Check Sheet.

WLAN Report

Print the wireless connection diagnostics report.

Serial No.

-

Display the machine's serial number.

Firmware Version

Main Version

Check your machine's firmware version.

Sub3 Version

Security Version

Firmware Update

-

Update your machine's firmware to the latest version.

Firmware Auto Check

-

View firmware information on the Home screen.

Page Counter

Total

Display the total number of printed pages.

Colour

Display the total colour printed pages.

Black and White

Display the total monochrome printed pages.

Parts Life *1

Drum

Display the remaining life of each drum unit.

Belt

Display the remaining life of the belt unit.

Fuser

Display the remaining life of the fuser unit.

PF Kit MP

Display the remaining life of the PF Kit MP.

Reset

Machine Reset

Restore all the machine's settings that you have changed, such as Paper Type.

Network Reset

Restore all network settings of your machine to the factory settings.

Factory Reset

Reset the machine and restore the printer settings (including command settings) to the factory settings.

Local Language

-

Select the LCD language for your country.