Search

Site Map

Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load Paper in the Paper Tray > Change Machine Settings to Print on Letterhead or Preprinted Paper Using the Paper Tray

Change Machine Settings to Print on Letterhead or Preprinted Paper Using the Paper Tray

When you use letterhead or preprinted paper for 2-sided printing, change the machine's settings.
image
  • DO NOT load different sizes and types of paper in the paper tray at the same time. Doing this may cause the paper to jam or misfeed.
  • If the print position is misaligned with the letterhead or preprinted objects, the print position is adjustable using the Print Position setting for the paper tray.
  • Some preprinted paper may cause print stains, depending on the printing method and ink type.

Orientation

image

For 1-sided printing

  • face down
  • top edge towards the front of the paper tray
image

For automatic 2-sided printing (long edge binding)

  • face up
  • bottom edge towards the front of the paper tray

HL-L5218DN/HL-L5228DW

  1. Press image or image to select the following:
    1. Select [Printer]. Press 确定.
    2. Select [2-sided]. Press 确定.
    3. Select [Single Image]. Press 确定.
  2. Press image or image to select [2-sided Feed], and then press 开始.

HL-L6418DW

  1. Press image[Settings]>[All Settings]>[Printer]>[2-sided]>[Single Image]>[2-sided Feed].
  2. Press image.
Related Information
Did you find the information you needed?

find moreaccept