Search

Site Map

Home > Edit Labels > Create Serialised Labels > Create Labels with Two Serialised Ranges

Create Labels with Two Serialised Ranges

Create labels with two serialised ranges by entering the pattern text, as shown.

  • Entering Text Pattern: A-W10
  • Serialised Range: (1) and (2)
  • Printed Label Result:
    image

PT-E310BT

  1. Type "A-W10" using the keyboard.
  2. Press image and then press image.
  3. Press image or image to select [Simultaneous], and then press OK.
  4. Specify the first range (1) you want to serialise.
    1. Position the cursor to the left of the first character of the range, and then press OK.
    2. Press image or image to select the last character of the range, and then press OK.
    (For (1) in this example, position the cursor to the left of "A" and press OK twice since the first and last characters are the same.)
    image
  5. Repeat the previous step to specify the second range (2) you want to serialise.
    image
  6. Press image, image, image, or image to set the following parameters (for this example):
    • Set "4" in the [Count] menu.
    • Set "1" in the [Incremented by] menu.
    • Select [Norm] from the [Type] menu.
    When you set them all, press OK.
  7. Press image.
    You can select [All], [Current], or [Range] for the print option.

PT-E510/PT-E560BT

  1. Type "A-W10" using the keyboard.
  2. Press image.
  3. Press image or image to select [Simultaneous], and then press OK.
  4. Specify the first range (1) you want to serialise.
    1. Position the cursor to the left of the first character of the range, and then press OK.
    2. Press image or image to select the last character of the range, and then press OK.
    (For (1) in this example, position the cursor to the left of "A" and press OK twice since the first and last characters are the same.)
    image
  5. Repeat the previous step to specify the second range (2) you want to serialise.
    image
  6. Press image, image, image, or image to set the following parameters (for this example):
    • Set "4" in the [Count] menu.
    • Set "1" in the [Incremented by] menu.
    • Select [Normal] from the [Type] menu.
    When you set them all, press OK.
  7. Press image.
    You can select [All], [Current], or [Range] for the print option.
Related Information
Did you find the information you needed?

find moreaccept