Search

Site Map

Home > Edit Labels > Create Serialised Labels > Create Advanced Serialised Labels

Create Advanced Serialised Labels

Create advanced labels with two serialised label ranges by entering the text pattern, as shown.

  • Entering Text Pattern: W10-A
  • Serialised Range: (1) and (2)
  • Printed Label Result:
    image

PT-E310BT

  1. Type "W10-A" using the keyboard.
  2. Press image and then press image.
  3. Press image or image to select [Advanced], and then press OK.
  4. Specify the first range (1) you want to serialise, and then select the count and increment for the first range.
    1. Position the cursor to the left of the first character of the range, and then press OK.
    2. Press image or image to select the last character of the range, and then press OK.
      image
    3. Press image, image, image, or image to set the following parameters (for this example):
      • Set "4" in the [Count] menu.
      • Set "1" in the [Incremented by] menu.
      • Select [Norm] from the [Type] menu.
      When you set them all, press OK.
  5. Specify the second range (2) you want to serialise, and then select the count and increment for the second range.
    1. Position the cursor to the left of the first character of the range, and then press OK.
    2. Press image or image to select the last character of the range, and then press OK.
      (For (2) in this example, position the cursor to the left of "A" and press OK twice since the first and last characters are the same.)
      image
    3. Press image, image, image, or image to set the following parameters (for this example):
      • Set "2" in the [Count] menu.
      • Set "1" in the [Incremented by] menu.
      • Select [Norm] from the [Type] menu.
      When you set them all, press OK.
  6. Press image.
    You can select [All], [Current], or [Range] for the print option.

PT-E510/PT-E560BT

  1. Type "W10-A" using the keyboard.
  2. Press image.
  3. Press image or image to select [Advanced], and then press OK.
  4. Specify the first range (1) you want to serialise, and then select the count and increment for the first range.
    1. Position the cursor to the left of the first character of the range, and then press OK.
    2. Press image or image to select the last character of the range, and then press OK.
      image
    3. Press image, image, image, or image to set the following parameters (for this example):
      • Set "4" in the [Count] menu.
      • Set "1" in the [Incremented by] menu.
      • Select [Normal] from the [Type] menu.
      When you set them all, press OK.
  5. Specify the second range (2) you want to serialise, and then select the count and increment for the second range.
    1. Position the cursor to the left of the first character of the range, and then press OK.
    2. Press image or image to select the last character of the range, and then press OK.
      (For (2) in this example, position the cursor to the left of "A" and press OK twice since the first and last characters are the same.)
      image
    3. Press image, image, image, or image to set the following parameters (for this example):
      • Set "2" in the [Count] menu.
      • Set "1" in the [Incremented by] menu.
      • Select [Normal] from the [Type] menu.
      When you set them all, press OK.
  6. Press image.
    You can select [All], [Current], or [Range] for the print option.
Related Information
Did you find the information you needed?

find moreaccept