Search

Configure Your Wi-Fi Direct Network Using the One-Push Method

Related Models:DCP‑T510W / DCP‑T710W / MFC‑T810W / MFC‑T910DW

DCP-T510W/DCP-T710W/MFC-T810W

If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
image

When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi Direct connection request received. Press [OK] to connect.] will appear on the LCD. Press OK to connect.

  1. Press Menú (Menu).
  2. Press image or image to select the following:
    1. Select [Network]. Press OK.
    2. Select [Wi-Fi Direct]. Press OK.
    3. Select [Push Button]. Press OK.
  3. When [Wi-Fi Direct On?] appears, press image to select [On]. To cancel, press image.
  4. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears. Press OK on your Brother machine. This will start the Wi-Fi Direct setup.
  5. Do one of the following:
    • When your Brother machine is the G/O (Group Owner), connect your mobile device to the machine directly.
    • When your Brother machine is not the G/O, it will display available device names with which to configure a Wi-Fi Direct network. Select the mobile device to which you want to connect and press OK. Search for available devices again by selecting [Rescan].
  6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup.

MFC-T910DW

If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
image

When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi Direct connection request received.] will appear on the LCD. Press image to connect.

  1. Press Ajustes (Settings).
  2. Press image or image to select the following:
    1. Select [Network]. Press OK.
    2. Select [Wi-Fi Direct]. Press OK.
    3. Select [Push Button]. Press OK.
  3. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device.] appears. Press image on your Brother machine. This will start the Wi-Fi Direct setup.
  4. Do one of the following:
    • When your Brother machine is the G/O (Group Owner), connect your mobile device to the machine directly.
    • When your Brother machine is not the G/O, it will display available device names with which to configure a Wi-Fi Direct network. Select the mobile device to which you want to connect and press OK. Search for available devices again by selecting [Rescan].
  5. If your mobile device connects successfully, the machine displays [Connected]. You have completed the Wi-Fi Direct network setup.
Was this page helpful?

Yes

No