Search

Home > Troubleshooting > Printer Jam or Paper Jam > Paper is Jammed in the Multi-purpose Tray (Jam D MP tray)

Paper is Jammed in the Multi-purpose Tray (Jam D MP tray)

Related Models:MFC‑T910DW

If the LCD displays [Jam D MP Tray], follow these steps:

  1. Unplug the machine from the AC power outlet.
    IMPORTANT

    Before you unplug the machine from the power source, you can transfer your faxes that are stored in the machine's memory to your computer or another fax machine so you will not lose any important messages.

  2. Remove any paper that is loaded on the MP tray.
    Place the paper support back into the MP tray cover.
    image
  3. Pull the paper tray (1) completely out of the machine.
    image
  4. Pull the two green levers inside the machine to release the jammed paper.
    image
  5. Slowly pull out the jammed paper (1).
    image
    image

    If you are having difficulty pulling paper out, push the release lever (1) toward the back of the machine, and then pull the paper.

    image
  6. Close the MP tray cover.
    image
  7. Put the paper tray firmly back in the machine.
    image
  8. While holding the paper tray in the machine, pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
    image
  9. Reconnect the power cord.
Was this page helpful?

Yes

No