Home > Troubleshooting > If You Are Having Difficulty with Your Machine > Other Problems
Other Problems
Copying Difficulties
Difficulties | Suggestions |
---|
Black lines or streaks appear in copies. ![]() | Black lines on copies are typically caused by dirt or correction fluid on the glass strip. Clean the glass strip, scanner glass, and the white bar and white plastic above them. See Related Information: Clean the Scanner. |
Black marks or spots appear in copies. | Black marks or spots on copies are typically caused by dirt or correction fluid on the scanner glass. Clean the scanner glass and white plastic above it. See Related Information: Clean the Scanner. |
Dark lines appear at regular intervals. ![]() | Check and adjust the paper feed. See Related Information: Correct the Paper Feed to Clear Vertical Lines. |
Copies are blank. | Make sure you are loading the document correctly. See Related Information: Load Documents in the Automatic Document Feeder (ADF). See Related Information: Load Documents on the Scanner Glass. |
Poor copy results when using the ADF. (ADF models) | Try using the scanner glass. See Related Information: Load Documents on the Scanner Glass. |
Fit to Page does not work correctly. | Make sure the document is not skewed on the scanner glass. Reposition the document and try again. |
Scanning Difficulties
Difficulties | Suggestions |
---|
TWAIN or WIA errors appear when starting to scan. (Windows) | Make sure the Brother TWAIN or WIA driver is selected as the primary source in your scanning application. For example, in Nuance™ PaperPort™ 14SE, click to choose the Brother TWAIN/WIA driver. |
OCR does not work. | Try increasing the scanning resolution. |
Poor scanning results when using the ADF. (Black lines appear in the scanned data.) (ADF models) | Clean the white bar and the glass strip underneath it. See Related Information: Clean the Scanner. |
Try using the scanner glass. See Related Information: Load Documents on the Scanner Glass. |
PhotoCapture Center Difficulties (DCP-J572DW/DCP-J772DW/MFC-J690DW/MFC-J890DW)
Difficulties | Suggestions |
---|
Removable Disk does not work correctly. | Make sure the Removable Disk function is set to on. If the problem continues, make the following steps:
|
Cannot access Removable Disk from the computer. | Make sure the Removable Disk function is set to on and you have correctly inserted the memory card or USB Flash drive. |
Part of my photo is missing when printed. | Make sure Borderless printing and Cropping are turned off. See Related Information: Print Borderless Photos from Media. See Related Information: Print Photos with Auto Cropping. |
Software Difficulties
Difficulties | Suggestions |
---|
Cannot print. | Uninstall and reinstall the Brother driver. |
“Device Busy” appears on the computer screen. | Make sure the machine is not showing an error message on the machine's display. |