Home > Troubleshooting > If You Are Having Difficulty with Your Machine > Paper Handling and Printing Problems
Paper Handling and Printing Problems
Printing Difficulties
Difficulties | Suggestions |
---|
No printout | Check that the correct printer driver has been installed and selected. |
Check to see if the machine's display is showing an error message. See Related Information: Error and Maintenance Messages. |
Check that the machine is online:
|
One or more ink cartridges have reached the end of their life. See Related Information: Replace the Ink Cartridges. |
If old, unprinted data remains in the printer driver spooler, it will prevent new print jobs from printing. Open the printer icon and delete all data as follows:
|
The headers or footers appear when the document is displayed on the screen but do not appear when the document is printed. | There is an unprintable area on the top and bottom of the page. Adjust the top and bottom margins in your document to allow for this. See Related Information: Unprintable Area. |
Cannot perform ‘Page Layout’ printing. | Check that the paper size setting in the application and in the printer driver are the same. |
Print speed is too slow. | Try changing the printer driver setting. The highest resolution needs longer data processing, sending and printing time. Try the other quality settings in the printer driver as follows:
|
Turn the Borderless feature off. Borderless printing is slower than normal printing. See Related Information: Print Settings (Windows) or Print a Photo (Mac). |
Turn the Quiet Mode setting off. Print speed is slower in Quiet Mode. See Related Information: Reduce Printing Noise. |
Print Quality Difficulties
Difficulties | Suggestions |
---|
Poor print quality | Check the print quality. See Related Information: Check the Print Quality. |
Make sure the Media Type setting in the printer driver or the Paper Type setting in the machine’s menu matches the type of paper you are using. See Related Information: Change the Paper Size and Paper Type. See Related Information: Print Settings (Windows) or Print Options (Mac). |
Make sure your ink cartridges are fresh. The following may cause ink to clog:
|
Make sure you are using Brother Original ink. Brother does not recommend the use of cartridges other than Brother Original cartridges or the refilling of used cartridges with ink from other sources. |
Make sure you are using one of the recommended types of paper. See Related Information: Acceptable Paper and Other Print Media. |
The recommended environment for your machine is between 20°C to 33°C. |
White lines appear in text or graphics. ![]() | Clean the print head. See Related Information: Clean the Print Head from Your Brother Machine. See Related Information: Clean the Print Head from Your Computer (Windows) or Clean the Print Head from Your Computer (Mac). |
Make sure you are using Brother Original ink. |
Try using the recommended types of paper. See Related Information: Acceptable Paper and Other Print Media. |
To prolong print head life, provide the best ink cartridge economy and maintain print quality, we do not recommend frequently unplugging the machine and/or leaving the machine unplugged for extended periods of time. We recommend using |
The machine prints blank pages. | Check the print quality. See Related Information: Check the Print Quality. |
Make sure you are using Brother Original ink. |
To prolong print head life, provide the best ink cartridge economy and maintain print quality, we do not recommend frequently unplugging the machine and/or leaving the machine unplugged for extended periods of time. We recommend using |
Characters and lines are blurred. ![]() | Check the printing alignment. See Related Information: Check the Print Alignment from Your Brother Machine. |
Change the print setting options. See Related Information: Change the Print Setting Options When Having Printing Problems. |
Printed text or images are skewed. | Make sure the paper is loaded correctly in the paper tray and the paper guides are adjusted correctly. See Related Information: Load Paper. |
Make sure the Jam Clear Cover is closed correctly. |
Smudge or stain at the top centre of the printed page. | Make sure the paper is not too thick or curled. See Related Information: Acceptable Paper and Other Print Media. |
Printing appears dirty or ink seems to run. | Make sure you are using the recommended types of paper. Do not handle the paper until the ink is dry. See Related Information: Acceptable Paper and Other Print Media. |
Make sure the printing surface is face down in the paper tray. |
Make sure you are using Brother Original ink. |
If you are using photo paper, make sure the glossy side of the photo paper is face down in the tray and you have set the correct paper type. If you are printing a photo from your computer, set the Media Type in the printer driver. |
Ink is smudged or wet when using glossy photo paper. | Be sure to check the front and back of the paper. Place the glossy surface (printing surface) face down. See Related Information: Change the Paper Size and Paper Type. |
If you use glossy photo paper, make sure the paper type setting is correct. |
Stains appear on the reverse side or at the bottom of the page. | Make sure the printer platen is not dirty with ink. See Related Information: Clean the Machine's Printer Platen. |
Make sure you are using Brother Original ink. |
Make sure you are using the paper support flap. See Related Information: Load Paper. |
Make sure the paper feed rollers are not dirty with ink. See Related Information: Clean the Paper Feed Rollers. |
The machine prints dense lines on the page. | Windows Select Reverse Order in the Basic tab of the printer driver. |
The printouts are wrinkled. |
|
Make sure you are using Brother Original ink. |
Paper Handling Difficulties
Difficulties | Suggestions |
---|
The machine does not feed paper. | Make sure the paper tray is pushed in all the way until it locks into place. |
Make sure the Jam Clear Cover at the back of the machine is closed. |
(DCP-J572DW/DCP-J772DW/MFC-J690DW) Return the photo paper tray to the Normal printing position when you use cut sheet paper. See Related Information: Load Photo or Photo L Paper in Photo Paper Tray. |
If the machine's LCD displays a Paper Jam message and you still have a problem, see Related Information: Error and Maintenance Messages. |
If the paper tray is empty, load a new stack of paper into the paper tray. |
If there is paper in the paper tray, make sure it is straight. If the paper is curled, straighten it. Sometimes it is helpful to remove the paper, turn the stack over and put it back in the paper tray. |
Reduce the amount of paper in the paper tray, and then try again. |
Clean the paper pick-up rollers. See Related Information: Clean the Paper Pick-up Rollers. |
Make sure that the paper is within specifications for the machine. See Related Information: Paper Weight and Thickness. |
Photo paper does not feed correctly. | When you print on Brother Photo paper, load one extra sheet of the same photo paper in the paper tray. An extra sheet has been included in the paper package for this purpose. |
Machine feeds multiple pages. |
See Related Information: Load Paper. |
Make sure the Jam Clear Cover is closed correctly. See Related Information: Printer Jam or Paper Jam. |
Make sure the Base Pad in the paper tray is not dirty. See Related Information: Clean the Base Pad. |
There is a paper jam. | See Related Information: Printer Jam or Paper Jam. Make sure the paper guides are set to the correct paper size. |
Use the jam prevention settings. For copying See Related Information: Change the Print Setting Options When Having Printing Problems. For printing See Related Information: Prevent Smudged Printouts and Paper Jams (Windows) or Prevent Smudged Printouts and Paper Jams (Mac). |
The paper jams when you use 2-sided copy or 2-sided print. | If paper jams occur frequently during 2-sided copying or 2-sided printing, the paper feed rollers may be stained with ink. Clean the paper feed rollers. See Related Information: Clean the Paper Feed Rollers. |
Printing Received Faxes (MFC models)
Difficulties | Suggestions |
---|
| This is usually caused by a poor telephone connection. Make a copy; if your copy looks good, you probably had a bad connection, with static or interference on the telephone line. Ask the other party to send the fax again. |
Black lines when receiving. | The sender’s scanner may be dirty. Ask the sender to make a copy to see if the problem is with the sending machine. Try receiving from another fax machine. |
Left and right margins are cut off or a single page is printed on two pages. | If the received faxes are divided and printed on two pages or if you get an extra blank page, your paper size setting may not be correct for the paper you are using. See Related Information: Change the Paper Size and Paper Type. |
Turn on Auto Reduction. See Related Information: Shrink Page Size of an Oversized Incoming Fax. |
Received colour fax prints only in monocrome. | Replace the colour ink cartridges that have reached the end of their life, and then ask the other person to send the colour fax again. See Related Information: Replace the Ink Cartridges. |