Search

Site Map

Configure Your Wi-Fi Direct Network Using the One-Push Method

DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW

If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
  1. Press Menu.
  2. Press image or image to select the [Network] option, and then press OK.
  3. Press image or image to select the [Wi-Fi Direct] option, and then press OK.
  4. Press image or image to select the [Push Button] option, and then press OK.
  5. When [Wi-Fi Direct On?] appears, enable the Wi-Fi Direct network.
  6. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears on the machine's LCD. Press OK on your machine.
    This will start the Wi-Fi Direct setup. To cancel, press Clear.
  7. Do one of the following:
    • When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine directly.
    • When your Brother machine is not the G/O, it will display available device names with which to configure a Wi-Fi Direct network. Press image or image to select the mobile device you want to connect to and press OK. Search for available devices again by pressing [Rescan].
  8. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from or scanning to your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.

HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW

If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
image
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi Direct connection request received.Press [OK] to connect.] will appear on the LCD. Press [OK] to connect.
  1. Press image[Settings]>[All Settings]>[Network]>[Wi-Fi Direct]>[Push Button].
  2. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device. Then Press [OK].] appears on the machine's LCD. Press [OK] on your machine.
    This will start the Wi-Fi Direct setup. To cancel, press image.
  3. Do one of the following:
    • When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine directly.
    • When your Brother machine is not the G/O, it displays available device names with which to configure a Wi-Fi Direct network. Select the mobile device you want to connect to. Search for available devices again by pressing [Rescan].
  4. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from or scanning to your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.
Related Information
Was this page helpful?

Yes

No

find moreaccept