Search

Site Map

Home > Fax > Receive a Fax > Receive Mode Settings > Set the Number of Rings Before the Machine Answers (Ring Delay)

Set the Number of Rings Before the Machine Answers (Ring Delay)

Related Models:MFC‑L2710DW / MFC‑L2713DW / MFC‑L2715DW / MFC‑L2716DW / MFC‑L2730DW / MFC‑L2750DW / MFC‑L2751DW / MFC‑L2770DW / MFC‑L2771DW
When somebody calls your machine, you will hear the normal telephone ring sound. The number of rings is set in the Ring Delay option.
  • The Ring Delay setting sets the number of times the machine rings before it answers in the Fax Only and Fax/Tel Modes.
  • If you have external or extension telephones on the same line as the machine, keep the Ring Delay setting of 2.

MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW

  1. Press image (FAX).
  2. Press Menu.
  3. Press image or image to display the [Fax] option, and then press OK.
  4. Press image or image to display the [Setup Receive] option, and then press OK.
  5. Press image or image to display the [Ring Delay] option, and then press OK.
  6. Press image or image to select the number of rings you want the line to ring before the machine answers, and then press OK.
  7. Press Stop/Exit.
    image
    If you select [00], the machine will answer immediately and the line will not ring at all (available only for some countries).

MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW

  1. Press image[Settings]>[All Settings]>[Fax]>[Setup Receive]>[Ring Delay].
  2. Press the number of rings you want the line to ring before the machine answers.
    image
    If you select [0], the machine will answer immediately and the line will not ring at all (available only for some countries).
  3. Press image.
Related Information
Was this page helpful?

Yes

No

find moreaccept